Table of Content
Start by checking that you have entered the WiFi password correctly. Follow the steps laid out above to set up the WiFi connection, enter the password carefully, note any capitalizations and special characters. In case your shark robot vacuum light is flashing that might indicate a different problem. If you were able to connect to your home network, proceed to the app setup process. We recommend that you use the eye icon when entering your password to make sure it is correct.
This will delete all the local files stored on your device, one of which may have been corrupt. When you reinstall the app, it will start fresh and should connect easily. This article will explore some common causes of connectivity issues with your Shark vacuum and the app and discuss how to solve the problems. The device will pop up with the Wi-Fi network that your phone is already connected with. Select that Wi-Fi, if you have to connect it to some other Wi-Fi then you have to check the Wi-Fi options in the shark clean app.
Three: Update The Firmware & The App.
A weak internet connection may allow your device to register the WiFi but not fully connect. Similarly, trying to set the machine up from a different room can prevent proper connectivity, and the app may not work correctly. But many can be solved by ensuring you have a strong enough connection before bringing the new appliance into the house. You may find that the connection is not strong enough to handle the robot vacuum in areas with unreliable WiFi. If you bought a shark robot then you should avail its features to the maximum. Wi-Fi connectivity is also one of the best features that it offers to its customers.
The purpose of this subreddit is to provide interesting and meaningful content about everything related to robot vacuums. Disconnect the battery from the device by pulling it out of the circuit. If your house is so big and it’s hard to find the right place to put your router, you can buy a WiFi range extender or install a mesh network to boost the signal.
Connect smart home devices in the Google Home app
$60 discount applies only to orders with the purchase of HP202 or ZU62 models available from sharkclean.com. To receive the discount, enter JOLLY60 in the coupon code box during checkout. $60 discount is applied to order subtotal, before shipping and taxes, and is limited to the purchase of HP202 or ZU62 available from sharkclean.com. $100 discount applies only to orders with the purchase of AZ3002, RV2502AE, IZ662H, and HZ602 models available from sharkclean.com.
If you’re running your Shark vacuum on outdated firmware make sure to update it in order to fix the connectivity issues. In some rare cases you might want to try to reset your shark vacuum to see if it clears any bugs in the system. If all else fails, reboot the router and start the process over, connecting to the app and your phone, as discussed above.
RV1000, RV1000S, RV1000AE, RV2000 & RV2000WD Series
If you are new to the device you have to make an account on the SharkClean app. After receiving a confirmation email you can step into the SharkClean app. The sharkiq integration allows you to control your Shark IQ vacuum. Once you have removed the screws, open the battery lid.
To receive the discount, enter JOLLY100 in the coupon code box during checkout. $100 discount is applied to order subtotal, before shipping and taxes, and is limited to the purchase of AZ3002, RV2502AE, IZ662H, and HZ602 available from sharkclean.com. $150 discount applies only to orders with the purchase of IZ441H or AZ2002 models available from sharkclean.com. To receive the discount, enter JOLLY150 in the coupon code box during checkout. $150 discount is applied to order subtotal, before shipping and taxes, and is limited to the purchase of IZ441H or AZ2002 available from sharkclean.com. $75 discount applies only to orders with the purchase of HZ3002 model available from sharkclean.com.
Make sure your phone is connected to your home Wi-Fi network before trying to connect your robot. We recommend you select the eye icon next to the password entry to verify you are entering your password correctly. Select the ‘Forgot Password’ option on the sign-in page. Turn off the robot using the switch on the side, then wait 10 seconds. Make sure that you entered the correct Wi-Fi network password.
Once you have the correct version of the app running on the newest version of your phone’s software, double-check that both your phone and your unit are running on the same WiFi network. Furthermore, the Shark vacuum connects to smartphones through the WiFi connection within the house. If your phone is not connected to the WiFi or has been left on airplane mode, for example, it will not be able to pair with the appliance. Only the robot units are intended to work with the smartphone app. Also, the app is no longer running on older smartphone systems, which means if you have an iPhone that is running on iOS 11 or under, the app will not work.
You will find your place clean after you allow the shark robot to do its magic on your place with the assigned specifications. There are a few reasons why your Shark vacuum is not connecting to the WiFi. Unfortunately, without a stable WiFi connection, you will be unable to control the device.
Turn OFF the robot, using the switch on the side. It disconnects the device for all members of the home. At the top left, tap Add Set up device Works with Google. These days’ people are more inclined toward technology. The technology freaks, most importantly, are loved to be surrounded by modern and enhanced technology.
No comments:
Post a Comment